50
922-20007052/1.2
Description
The
Configuration
page allows you to change the parameters you need to connect to
the M3 Sonar API.
These parameters match the default values defined in the “UsersInfo.xml” file of the
M3 Sonar API. If you change the default values in the “UsersInfo.xml” file, then you
must change the values here too.
Altered parameters on this page will only be saved if you overwrite the “Default.xml”
file or create your own configuration file.
You can also change the location of your log files.
Details
IP Address for M3 Sonar API
If the M3 Sonar API is running on the same computer as the M3 Sonar API Testing
software, leave the IP Address as 127.0.0.1. 127.0.0.1 is a loopback address
(localhost). This address establishes an IP connection to the same computer that
you are using. If the M3 Sonar API is running on a different computer, enter that
computer’s IP Address.
Note
Do not enter the Sonar Head’s IP Address.
Execution Timeout
During script execution, if the M3 Sonar API doesn’t respond within the timeout
defined here, then script execution will end and an error message will appear.
Enter the number of seconds before the timeout occurs.
Commands Port #
The Commands Port receives API commands from the M3 Sonar API
Testing software. Make sure this value matches the port defined in the
<API_Commands_Port> XML tag in the “UsersInfo.xml” file of the M3 Sonar
API.
M3 Sonar API Instruction Manual
