3. Getting Started
When power is applied to the display, a start-up screen displays for approximately 7 seconds
while the display performs a self test. If the display makes a ‘bleep-ing’ sound for longer than 1
second, self-test has failed. Users can attempt to rectify the fault by restoring factory defaults (see
Configuration menu/section 10 for details); if the fault persists, contact your supplier for guidance.
After the start-up screen disappears, the Engine Monitor starts displaying readings on its virtual
gauges if it is connected to an active source of data. The Engine Monitor displays the ‘main
engine display’ or tri-screen on initial start-up, but note that after use this changes to the screen
that was last displayed (see Preferred Screen Store/section 13 for details). The Engine Monitor
display modes are detailed in the following sections.
page 6
