Kongsberg EA440SP, Quick Installation Manual

Page: 10 / 14

10
418799/A
A
Transducer: Channel 1 - 2
B Transducer: Channel 3
C
Transducer: Channel 4
D
Power
E Ethernet
F
Ground
Procedure
1 Connect the DC cable from the power supply to the +12 Vdc socket.
2 Connect the provided grounding cable from the nearest grounding point to the
dedicated terminal on the EA440SP.
Further requirements
Voltage requirement
: 12 to 15 VDC, 5A.
Connecting the Ethernet cable from the
EA440SP to the computer
The Computer is connected to the Suitcase using a high speed Ethernet cable.
Context
Note
It is very important that a high quality Ethernet cable is used. You must use CAT-5E STP
(Shielded Twisted Pair) quality or better. Using cables with lower bandwidth capacity
will reduce the EA440SP performance.
A B C D E F
A Transducer: Channel 1 - 2
B
Transducer: Channel 3
C
Transducer: Channel 4
EA440SP Splashproof