Kongsberg cJoy OT
Rud. Lim. in Auto Yaw Control
Allows you to set the maximum rudder angle when automatic heading control is
active. Within the configured range the value can be increased and decreased
in 1 degree steps (see
Setting the maximum rudder angle for automatic heading
on page 119).
Rud. Lim. in Manual Yaw Control
Allows you to set the maximum rudder angle when joystick heading control is
active. Within the configured range the value can be increased and decreased
in 1 degree steps (see
Setting the maximum rudder angle for joystick heading
on page 120).
Steer Mode
Allows you to select the steering mode (e.g.
Synchronous
,
Async Auto
,
Async
STBD
,
Async PORT
and/or vessel specific) for the autopilot function (see
on page 120).
This field is not shown if the vessel has one main propulsion unit with one rudder
or one azimuth thruster used for autopilot steering.
Steer Group
Allows you to select the steering group (e.g.
Propeller
,
Emergency
,
AUX
and/or
vessel specific) for the autopilot function (see
on
page 121).
This field is not shown if the system is configured with only one steering group.
Heading Setpoint pop-up dialog
The Heading Setpoint pop-up dialog is used to change the heading setpoint when the
system is in a mode where automatic heading control is possible.
To display this input dialog, press one of the heading wheel buttons (
-
,
Set heading
and
+
).
The value (in degrees) shown in the dialog is the heading setpoint from the heading
wheel, which changes immediately whenever the wheel is turned, or one of the
+
and
-
buttons is pressed.
54
385585/C
Summary of Contents for cJoy OT
Page 207: ...Message explanations A 86 385585 C...
Page 208: ...2015 Kongsberg Maritime...
