Resetting the controller to default:
To reset the PlayStation®2 controller back to its default settings:
1.
Press the
MACRO button
to turn the programming function. The
MACRO LED
will be
illuminated indicating that the programming function is active.
2.
Press the button you wish to reset the
MACRO LED
will become flashing.
3.
Press the
MACRO button
to turn the programming function OFF. The
MACRO LED
will
be distinguished.
PSone
TM
PlayStation® and PlayStation®2 are registered trademarks of Sony. This product is not
sponsored, endorsed or approved by Sony
.
DECLARATION OF CONFIRMITY
We declare under our responsibility that the product;
Brand name:
KÖNIG
Model:
GAMPS2-WCONT30
Description:
RF 2.4Ghz wireless gamepad
Is in conformity with the following standards;
EN 300 440-2 V1.1.1 (2001)
EN 301 489-1/3 V1.4.1 (2002)
EN 60950-1 (2001)
Following the provisions of the 1999/5/EC R&TTE Directive.
Conform this regulation it’s allowed to use this product in
all European Community & EFTA countries.
Nedis BV is not responsible for the use of this product outside
the European Community & EFTA countries.
WARNING
:
Disconnect the product from mains and other equipment if a problem should occur. Do not
expose the product to water of moisture.
WARRANTY:
No guarantee or liability can be accepted for any changes and modifications of the product or
damage caused due to incorrect use of this product.
GENERAL:
Designs and specifications are subject to change without a notice.
EN