www.kong.it
7
CEVEDALE MONO
3
MAINTENANCE AND STORAGE
4
PERIODIC INSPECTIONS
Device maintenance consists of:
- Frequent washing in warm drinking water
(30°C), possibly with the addition of neutral
detergent. Rinse and, without spinning,
leave it to dry without leaving it in the direct
sunlight.
- Lubricate moving parts (only for metal
devices) with silicon-based oil. This
operation is to be performed once the
device has dried out, being careful to
avoid contact with textile components.
In addition, if necessary:
- disinfect the device, soaking it in
warm water containing 1% of sodium
hypochlorite (bleach). Rinse with drinking
water and, without spinning, leave it to
dry without leaving it in the direct sunlight.
Avoid sterilising textile devices in an
autoclave.
We would strongly advise having pre and
post use controls carried out by qualified
individuals, as indicated in the instructions
for the specific device.
Except in the case of more stringent legal
requirements, devices must be inspected
Storage:
store the devices in a dry (40-
90% relative humidity), fresh (temperature
5-30°C) and dark place, chemically
neutral (absolutely avoid salty and/or acid
environments), away from sharp edges,
corrosive substances or other possible
detrimental conditions.
annually and the inspections must be
performed by a competent person that
has been trained and authorised by the
manufacturer. The outcome of these
periodic inspections must be recorded on
the device’s inspection chart.
Summary of Contents for 842010000KK
Page 1: ...EN 842010000KK CEVEDALE MONO...
Page 12: ...14...
