EN - 14
and the triple zone will be energized.
Pressing again will cause the triple zone
of the heater to switch off. Each operation
causes a status change of the dual/triple
zones in the following manner (Dual zone
on, triple zone on, all extended zones off,
dual zone on, triple zone on, dual zone on,
etc. ...)
Set Cooking Level with and without Heat
Boost
All heaters are equipped with heat boost
functionality.
If the heat boost is active, the heater will
be operated with maximum power for the
period of the heat boost time, which is
dependent on the selected heat setting.
This is indicated through a flashing ´
A
`,
alternating with the heat setting value (e.g.
0.5 sec ´
A
` and 0.5 sec ´
9
`) in the heater
display. Once the heat boost time ended
only the heat setting will be indicated.
If the heat boost is to be used for a heater,
touch or slide the heat level 0, then touch
heat level 9 again. After setting the heat to
level 9 , an alternating ´
A
` and ´
9
` will be
displayed. This means that level 9 and heat
boost are now active.
The heat boost can be turned off by
pressing the Slider Button until a heat
setting of ´
0
` is displayed.
Turn Off Individual Heaters
A selected heater can be turned off in 3
different ways:
• Simultaneous pressing of the right
and left parts of the slider button
.
• Reduction of the heat setting to
´
0
` by pressing the slider button
.
• Use of the timer turn off function for the
corresponding heater.
Timer Function
The control can run a maximum of 4
heater assigned timers and 1 minute
minder (which is not assigned to a heater)
simultaneously. The timers can only be
used in B-Mode. A heater timer can only
be assigned to an active heater, set at a
level between 1-9. The minute minder is
independent of any heater.
In order to use both functions, the timer
function must be activated using the
Activate/Deactivate Timer button .
Pressing for the fist time after activating
the heaters, controls the minute minder (no
Cooking Zone Indicator is flashing, they are
all on or off).
Pressing for a second time, assigns a
timer to one of the activated heaters. The
Cooking Zone Indicator will be flashing.
Pressing again, assigns the next timer
in a clockwise direction to the next active
heater. And so on...
Minute minder
No matter whether a heater is activated or
not, the minute minder can be operated by
pessing . ´
00
` is displayed and shows
that timer is active. The dot in the Timer
Display indicates that
can now be used to set the timer value.
The minute minder is selected when all
Cooking Zone Indicators are on or off (no
Cooking Zone Indicator is flashing).
With
, the timer value
can be set.
The minute minder timer begins counting
down once it has been set.
The minute minder cannot be stopped by
switching off the appliance or activating the
key lock function, it will continue to count
down.
After reaching the ´
00
`, the timer, buzzer
sounds. To stop the buzzer, press any
button.
Heater timer
Heater timers can be set only for activated
heaters (heater level must be set between
1-9).
The first press of ,activates the minute
minder. After touching the button for a
second time the timer is assigned to the
activated heater. This is indicated by the
corresponding Cooking Zone Indicator
flashing.
Pressing again after activating the first
heater timer, activates the timer for the next
active heater in a clockwise direction. This
is indicated by the flashing Cooking Zone
Indicator.
By pressing
, the timer
value for the heater can be set.
The timer for the heater that was set first is
indicated by the illuminated Cooking Zone
Indicator.
Pressing once again allows further
timers to be assigned to other activated
heaters.
10 seconds after the last operation, the
Summary of Contents for UKE6040KOCVSBR
Page 35: ......