OPERATIONS
Programme selector
Other
Functions
1.The drum will stop running after the programme ends,
the display will show " "
,
last cycle phase status light will flash. The
dryer will start
Anti-crease
if user doesn’t remove the load in
1 minute (refer to page 15). Please press
key to cut off power and
pull the plug out.
2.Deal with the problem accroding to “Malfunction display and solutions
, if
there is a unexpected stop during the drying procedure and the dryer show
information(refer to page 20 ).
the buzzer will beep,
the
【
】
function
【
On
/
Off
】
”
The drum will keep rotating after the programme starts, the state light in the
display area will flash in sequence, the remaining time displayed will change
automatically.
1.Press the
【
On/Off
】
button ,when
the
LED display screen brightens up, rotate
the programme knob to select the desired programme.
2.Select the
【
Delay
】
,
【
Time
】
,
【
Intensity
】
,
【
Speed Dry
】
,
【
Signal
】
or
【
Anti-Crease
】
functions for additional option.
3.Press the
【
Start/Pause
】
button.
Programme start
Programme end
• Instructions of the
【
Delay
】
function
This function is used for delaying clothes drying time within 24 hours
.
means the programme
time starts to decrease on the
Steps in details
1. Load your laundry and make sure the machine door is closed.
2. Press the
【
On/Off
】
button,then to turn the programme selector knob and select a
desired programme.
3. You can select the
【
Anti-Crease
】
or
【
Signal
】
functions according to your need.
4. To press the
【
Delay
】
key.
5. Continue to press the
【
Delay
】
to select the delay time.
6. After the
【
Start/Pause
】
button is pushed, the dryer is at the run condition.
The
drying procedure will be automatically performed when the delay time is over
.
7. If you push the
【
Start/Pause
】
button again, the delay function will be paused.
8. If you want to cancel the “Delay”
function, please press the
【
On/Off
】
button.
The delay time
will start after x hours . When the delay programme starts , the
display and the delay icon blinks .
Summary of Contents for SR 8.MKC0
