DMX address calculation
Front/Rear Panel
For DMX mode, DMX address from #1 to 9# dipswitches must be set, the address is set
from 1 to 511. Each dipswitch represents a binary value.
Dipswitch
Value
Dipswitch
Value
＃
1
1
＃
6
32
＃
2
2
＃
7
64
＃
3
4
＃
8
128
＃
4
8
＃
9
256
Front Panel Figure
＃
5
16
＃
10
DMX, Set to "0"
1. Laser Aperture
2. Sound Active Microphone
One unit has 5 channels, so each unit must be assigns 5 channels at least. We may
3. Sound Active Indicator:Blue
4. Power Indicator:Red
assign 8 channels for one unit, then DMX address = 8*N + 1, N=0, 1, 2, 3 …… Example,
One loop address=1, two loop address=9, three loop address=17, four loop address=25
Loop Address Binary Dipswitches
1 1 100000000
＃
1
2 9 100100000
＃
1+#4
3 17 100010000
＃
1+#5
4 25 100110000
＃
1+#4+#5
The dipswitches setting for DMX address see the " DMX Address Quick Reference Chart ".
Rear Panel Figure
DMX Control
1. Power Jack
2. Cooling Fan
The system only accepts the DMX512 signal of international standard to control the system.
3. Audio Sensitivity Knob
4. DMX Signal Indicator: Green
DMX Control Parameter Chart
5. Dipswitches: Function Setting
6. DMX or Linking Jack
Close, laser OFF
Function & Setting
Static patterns of DMX mode
Dynamic patterns of DMX mode
Sound Active
Sound active mode
The change of the laser pattern is controlled by sound, that is, the rhythm of the sound
Auto mode
control the effect of the changing laser pattern. Turning the sensitivity knob in the
Pattern selection
52 static/dynamic patterns
clockwise direction to increase the fixture’s sensitivity to sound, the knob in the counter
Position-X
Adjust position-X
clockwise direction to decrease. The laser diode will automatically turn off after 8
Position-Y
Adjust position-Y
seconds when the music stops.
Scanning speed
0 is speedy, 255 is slow
Dynamic pattens
0 is speedy, 255 is slow, has ten
AUTO
play speed
grade speed
Auto cycles the built-in programs without being controlled externally. It has no laser OFF.
Static pattern size
0 is small, 255 is big
Color Selection
RGBYCPW, 7 colors combinered
The mode allows a single unit to react to the beat of the music in the master mode.
Color Segment
Divide into 1 to 51 segment
1. Install the units in a suitable position (laying or appending).
Page 8
Page 5
Channel
Function
Value
Description
CH1
Mode
0
～
49
50
～
99
100
～
149
150
～
199
200
～
255
0
～
255
CH5
0
～
255
CH2
0
～
255
CH3
0
～
255
CH8
0
～
255
CH9
0
～
255
CH6
0
～
255
CH7
0
～
255
CH4
2
3
4
1
1
5
6
2
3
4