16
Checking the gun reaction and Sighting
S
This is the mode for checking the gun reaction and sighting.
The reaction of the gun can be checked by pointing the gun at the screen and pulling
the trigger.
To return to the “I/O’’ item selection screen, press the start button for player 1.
S
Performing the gun calibration
To calibrate the gun hold down the test button and shoot the spot at the center of the
screen for each players gun.
A bullet mark appears after shooting.
Always perform a calibration for both guns when calibrating.
Gun Check
•
After the gun has been repaired or replaced, be sure to calibrate the gun
•
Be careful to calibrate the gun accurately to ensure the game operates properly.
•
Perform a calibration for all (BOTH) the guns when calibrating.
13
6-2 – Game Settings and Adjustments
This section describes how to change and check the current game settings, as required.
S
Starting the Test Mode ------------------------------------------
1.
Turn on the power switch.
2.
While the game is in the attract mode, press the test switch on the service panel.
The main menu is displayed on the screen.
S
Exiting the Test Mode -------------------------------------------------------------
1.
Use / pull the trigger of the player 1 or player 2 gun to select “Game Mode” on
the main menu screen.
2.
While the “Game Mode” is selected press the player 1 start button. This will
return the game to the game mode. (Attract Mode)
S
Main menu Screen (Basic items) ------------------------------------------------
If the power is turned on while the test button pressed, the current settings and all the data
recorded in the “Ranking Data” and “Bookkeeping” are deleted and returned to their factory
settings.
PLEASE NOTE
•
If the system clock has not been set, “>” and “<” start flashing at both ends of
“BOOKKEEPING” to prompt you to set the clock.
•
If the gun calibration has not been made, “>” and “<” will flicker on both sides of the
“I/O CHECK” screen to prompt you to make the gun calibration.
Please Note