33
7-1 Replacing the coin selector
How to replace the coin selector
•Be sure to turn OFF the power switch and remove the power cord plug
from the receptacle before replacing the coin selector.
1
Open the maintenance door.
2
Remove the bolts (2 pieces) off the
coin selectors. Slide the coin
selectors to the right to taken
them out. See the sketch at right.
3
When mounting the coin selector,
push up the lever and follow the
procedure in the reverse order.
7 Maintenance and annex
7-2 Replacing the fuse
How to replace the fuse (10A, 1 pc.)
•Before replacing the fuse, be sure to turn OFF the power switch and
unplug the power cord from the receptacle.
•Be sure to replace the fuse with a new one of the same type.
•If the machine is in abnormal conditions and does not operate normally,
immediately turn OFF the power switch, unplug the power cord from the
receptacle and contact your nearest dealer.
1
Using a bladed screwdriver, turn
counterclockwise the cap of the
fuse holder on the AC bracket, and
draw out the cap.
2
Take out the fuse and set a new one
in position. Tighten up the cap.
Lever
Coin selector
Bolt
Cap
Fuse (10A)
AC bracket
