Konami RUN AND GUN, Instruction Manual, Page: 5 / 22

RUN AND GUN
TECHNICAL INFORMATION (cont.)
(4) EXPLANATION OF THE ITEMS
The following screen below will appear. Select item to be modified with Player JOYSTICK up/down
and move JOYSTICK right/left to modify setting. Factory settings are shown in green, and modified results
in red. After modification is completed, select “SAVE AND EXIT” and press Player l’s button A to save
and return to MAIN MENU.
If you select “EXIT” instead of “SAVE AND EXIT” after modifying some settings, the message appears;
“YOU DID NOT SAVE. DO YOU WANT TO SAVE? YES/NO.” When you choose “YES,” the screen
shows “NOW SAVING” and returns to MAIN MENU. If you select “NO,” “NO MODIFICATION” is shown
and then MAIN MENU appears.
1.
2.
3.
4.
I/O CHECK
all to see switched on. Press Player 1 and 2 SHOT buttons
“I
at the same time to return to MAIN MENU.
SCREEN CHECK
Adjust focus, alignment, size, etc. using the cross-hatch screen.
COLOR CHECK
Adjust color brightness so that the specified area will be colorless.
MASK ROM CHECK
Roms will be checked one after another, and the message “OK” or “BAD” will be displayed on the screen.
5. GAME OPTIONS
The following screen below will appear.
GAME OPTIONS
PLAY TIME
1 PLAY 4 MINUTE
DIFFICULTY LEVEL
FACTORY SETTINGS
SAVE AND EXIT
EXIT
PLYR JOYSTICK
Play time for credit.
Select from 1 to 12 minutes.
Difficulty setting.
Select out of 8 levels.
Returned to factory settings.
(Settings above are not always the factory settings.)
4