Konami DanceDanceRevolution, Operator'S Manual

Page: 41 / 66

39
•Before resetting the circuit protector, be sure to turn OFF the main power
switch and unplug the power cord from the receptacle.
•If the circuit protector trips soon again, immediately turn OFF the main
power switch, unplug the power cord, and contact your nearest dealer.
•There are high-voltaged parts inside the product. Other persons than
qualified industry specialist should not open the back door. When the
back door is opened, pay due attention not to touch the inside
unnecessarily.
•If the sub power switch of the service panel is turned OFF without turning
OFF the main power switch of the power supply unit, some parts in the
units remain live. When opening the back door, be sure to turn OFF the
main power switch and unplug the power cord from the receptacle.
•If the machine is in abnormal conditions and does not operate normally,
immediately turn OFF the main power switch, unplug the power cord from
the receptacle and contact your nearest dealer.
7-6 Resetting the circuit protector
If an overcurrent or short circuit occurs, the circuit protector will be automatically
actuated to protect the electric circuits of the game machine. When resetting the
circuit protector, turn OFF the main power switch, unplug the power cord from the
receptacle, eliminate the cause, and then press the button of the circuit protector.
How to reset the circuit protector
7 Maintenance
1
Be sure to turn OFF the main power
swith and unplug the power cord
from the receptacle.
2
Remove the cause of the trouble.
Press the button on the circuit
protector of the power unit.
Main power switch
Circuit protector (8A)
Power inlet
Power unit