Kompernass Powerfix KH 4179, Operating Instructions Manual

Page: 8 / 18

- 6 -
Placement
• Two retaining magnets
o
have been integrated on the underside of the
laser spirit level to secure the appliance onto steel surfaces.
• If you wish to use the tripod-stand
i
, screw these firmly onto the appliance
underside. Draw out the telesopic legs
i
.
• Align the laser spirit level at its desired location so that, in the two spirit
levels
q
and
w
, the air bubbles lie precisely between their respective
markings, the laser spirit level is then positioned exactly level in all direc-
tions. A ball and socket joint with retaining screw
u
is available for this
on the tripod stand. To level out floor/ground irregularities, the telesopic
legs
i
on the tripod stand can be drawn out to varying lengths.
Utilisation
Attention!!
This appliance contains a Class 2 laser. NEVER direct the laser beam
at people or animals.NEVER look directly into the laser beam.
• Press the On/Off switch
r
for the laser. When the appliance is correctly
aligned in all directions, as described on Page 6, there now appears a red
laser line
r
on the wall it is directed at, a line which is level with the floor/
ground. If the laser spirit level is standing on a level floor/the ground with-
out the tripod stand, the vertical distance of the laser line from the base
level amounts to 29,5 mm.
• Press the On/Off switch
e
for the spirit level illumination. In darkened
light conditions the spirit levels
q
and
w
now glow lightly.
• For simple length measurements a measuring scale
y
is printed onto the
side of the laser spirit level.
IB_KH4179_BN30296_LB3B 19.03.2009 14:22 Uhr Seite 6