- 60 -
Removing/replacing the spacer
To replace it, place the spacer
•
3
on the cutting head and press it
fi rmly.
To remove it, pull the spacer
•
3
downwards.
To protect the shaver area
•
4
you should, if you are not using the ap-
pliance, remove the spacer
3
and, in replacement, fi t the protective
cap on the shaver area
4
. Ensure that the elevations on the inner edge
of the protective cap do not grip into the grooves on the edge of the
shaver area
4
. Otherwise, the protective cap will not hold.
Cleaning and care
Emptying the catchment container
Pull the catchment container
•
5
off straight to the rear.
Empty out the textile remains.
•
Replace the catchment container
•
5
so that it is seated fi rmly.
LB5new.indb Abs1:60
LB5new.indb Abs1:60
25.02.2010 10:21:35 Uhr
25.02.2010 10:21:35 Uhr
Summary of Contents for KH1919
Page 17: ...16 LB5new indb Abs1 16 LB5new indb Abs1 16 25 02 2010 10 21 32 Uhr 25 02 2010 10 21 32 Uhr...
Page 35: ...34 LB5new indb Abs1 34 LB5new indb Abs1 34 25 02 2010 10 21 33 Uhr 25 02 2010 10 21 33 Uhr...
Page 51: ...50 LB5new indb Abs1 50 LB5new indb Abs1 50 25 02 2010 10 21 34 Uhr 25 02 2010 10 21 34 Uhr...