Kompernass KH1919, Operating Instructions Manual, Page: 59 / 83

- 58 -
The appliance may not come into contact with moisture. Therefore, do not
use the lint remover on moist fabrics.
1. Lay the textile on a fl at surface, such as an ironing board. Ensure that
the surface to be processed has no wrinkles. Otherwise, the textile
could be damaged.
2. Turn the distance spacer
3
to the desired position or remove it com-
pletely (see Chapter "Removing/replacing the spacer"):
- "Thick" with large bobbles and coarse textiles (large spacing to the cutter
knives)
- "Thin" with small lint/bobbles and fi ne textiles (small spacing to the cutter
knives)
- Remove the spacer, only for very fi ne lint (virtually no spacing to the cutter
knives).
3. Using the On/Off switch/Speed switch
2
, switch the lint remover to
the speed level I
LB5new.indb Abs1:58 LB5new.indb Abs1:58 25.02.2010 10:21:35 Uhr 25.02.2010 10:21:35 Uhr