- 5 -
Inserting the batteries
• Turn the battery compartment locking device
so that you are able to
remove the battery compartment cover
.
• Insert the batteries, 4 x 1.5V Type AA/Mignon, into the battery compart-
ment
. Ensure the polarities are correct, as shown in the illustration.
Close and secure the battery compartment cover
. The appliance is
now ready for use.
• When the batteries are exhausted, always replace all of them at the same
time. For replacements, use ONLY the type of battery detailed in the
Technical Data. In this regard, also take note of the notices contained in
the section “Disposal”.
Placement
Subject to personal choice/circumstances, you can suspend the appliance on
a cord, secure it to a smooth wall with the suction discs or simply use the
support stand.
• Select a location where, should the securing loosen itself, the appliance
will not fall into water and also where it will not be seriously damaged
by the fall.
• To suspend the appliance by the supplied cord, insert the suspension
appliance with cord
into the mounting holes
at the rear of the
appliance and slide them upwards.
• To secure the appliance to smooth surfaces, such as tiles or mirrors, with
the supplied suction discs
, insert them into the mounting holes
at the
rear of the appliance and then slide them upwards. Then press the appliance
with the suction discs
against the smooth surface.
• To set the appliance up, simply fold out the support stand
on the rear of
the appliance and place it on a level surface.
IB_KH2175_AR23361_LB4A 08.08.2008 12:25 Uhr Seite 5
