Kompernass 272322, Operating Instructions Manual

Page: 70 / 76

GB
│
67 ■ QC 360 A1
♦ If the quadrocopter starts drifting again, repeat the process.
Troubleshooting
This section contains important information about fault identification and rectifica-
tion. Follow the instructions to avoid hazards and damage.
Fault causes and rectification
The following table will help you to identify and rectify minor malfunctions:
Faults Possible cause Remedy
Remote control
does not work.
The remote control is not
switched on.
Switch on the remote control.
The batteries are inserted
incorrectly. Check the batteries and, if neces-
sary, insert them correctly.
Batteries are discharged. Replace the batteries.
Quadrocopter is
not responding.
No power supply.
Check the battery connection
on the quadrocopter.
Batteries in the remote control
are empty.
Charge the battery (if recharge-
able) or replace the batteries in
the remote control.
Possibly out of range.
Ensure that the distance between
the remote control and the quadro-
copter is no greater than 30 metres.
Quadrocopter
cannot be con-
trolled.
Excessive wind or air currents.
Do not fly in strong wind or air
currents as the quadrocopter is
not suitable for these conditions.
Quadrocopter
will not climb.
Not enough power.
Push the throttle lever all the
way forward.
Rechargeable battery is flat. Recharge the battery .