GB
│
65
■
QC 360 A1
The first flight
♦
Switch on the remote control by moving the ON/OFF switch to the "ON"
position. The control lamp flashes.
♦
Move the throttle lever to the rear (motors off).
♦
Connect the battery to the quadrocopter. To do this, connect the quadrocopter
plug connector to the battery plug connector . The quadrocopter’s control
lamps start flashing. The remote control beeps twice.
♦
Push the throttle lever all the way forward and then all the way back. You will
hear a short beep from the remote control. The quadrocopter’s control lamps
light up permanently to signal that the quadrocopter is ready for flight.
NOTE
►
The directional indications are always from the perspective of the "virtual"
pilot of the model aircraft. The two red control lamps on the quadrocopter
indicate the direction and mean "forwards".
Up/down
Turn left/right
Forwards/backwards
Sideways left/right
Summary of Contents for 272322
