Kompact KC572MF, User Manual

Page: 15 / 24

15
INSTALLATION
KC572MF
Only a qualified person in compliance with the instructions
provided must install the appliance. The manufacturer
declines all responsibility for improper installation, which
may harm persons and animals and damage property.
CAUTION
The power supply to the appliance must be switched
off before any adjustments or maintenance work is
undertaken.
INSTALLATION OF BUILT-UNDER DOUBLE
OVEN
This product can only be fitted under the work surface and
to ensure that the built-in appliance functions correctly it
should be installed using one of the two methods shown:
INSTALLATION METHOD 1
Fitting under the work top, between two units, a 600mm
gap is required for this installation.
INSTALLATION METHOD 1
Fix the two support rails using 8x screws [Ø4mm x 10mm]
provided, ensuring that they are level with the base of the
adjoining end panel.
Fix the remaining two support rails using 8 screws [Ø4mm
x 25mm] provided to the side of the oven,ensuring they
are level with the base of the oven.
Prepare two uprights (A) (not supplied) from MFC/MDF
material, dimensions need to be W:30-50mm, L:650mm,
D:18mm
Connect to mains power supply ensuring the cable is not
bent (see electrical connection)
Place the oven on the metal support rails by lifting the
appliance with the handle inserts located on the side of
the oven and position in place.
Secure the oven in place (see page 14)
600
INSTALLATION METHOD 2
Fitting under the work top in a new or existing oven
housing unit. Modifications to this unit will be required.
Existing or new
600mm cabinet
560
21
547
718
594
41
600
03
Support rail
570 min
720 min
703
20
15
A
650
560
21
547
718
594
41
600
03
Support rail
570 min
720 min
703
20
15
A
650