komodo KDQNARMT12A, User Manual

Page: 8 / 12

4.
Lie on the air bed to test its firmness.
5.
If you wish to make further adjustments, the control dial can be turned clockwise to
further inflate or turned anti-clockwise until the marker points towards “DEFLATE” to
let air out of the air bed. Turn the control dial back to “OFF” after achieving the
desired firmness level.
6.
Unplug the power cord and store it back into the power cord storage compartment.
The air bed is now ready for use.
Deflation and storage
1.
Plug in the power cord to a power outlet and switch the power outlet on. Turn the
control dial anti-clockwise to deflate the air bed.
2.
After the air bed is completely deflated, unplug the power cord and place it back
into the storage compartment.
3.
Lay the air bed with the textured side facing up and fold the air bed into thirds. Roll
up the air bed to release any remaining air and store away.
Notes:
•
After inflating the air bed for the first time, it is recommended to wait for 8-12 hours
so that the seams can buffer.
•
It is normal for the mattress to lose a small amount of air after being fully inflated.
• During initial use, the air bed may soften and require additional inflation to
maintain desired firmness. This is normal.
• If the air bed is intended to be used for an extended period, inflate the air bed for
10-15 seconds every day to maintain its firmness.
OFF
DEFLATE
INFLATE