3.2Functions of buttons
Buttons of Kommander Q5can be divided into two kindsThe first kind is
designed for controlling Q5 itselfThe second kind is dsigned for controlling T1
1Controlling Kommander Q5 itself
For Kommander Q5 debugging, mainly focus on calling the preplan and
switching signals. As mentioned earlier, below the device for the layer and
signal keys, the upper right for the preplan button. In the upper right directly
click on the preplan button to achieve preplan switching, can directly switch 10
preplan. Click on the layer button, and then click on the signal source, can
achieve the layer signal source switching; can also achieve USB signal material
switching.
2Control T1
The lower left button of the device ,it can be used to control T1
Instructions
Connect Kommander Q5 using a USB-A ---RS232 cable to computer Open
the computer device manager to see if the serial port is recognized Launch
T1clickSetting-system- COM -Central console Choose the one you saw in
computer device management click OK On Kommander Q5Choose plan group
first and choose plan