![background image](http://html1.mh-extra.com/html/kommander/mpc-q5/mpc-q5_user-manual_1991564011.webp)
change splice mode and change resolution of each output port
2Switcher of layers and change its priority
On the left side of the touch screen, you can choose the layer that is turned
on or off. Click on the eye icon on the left side of the corresponding layer to light
it up or extinguish it, and the layer can be turned on or off at the PVW interface.
Click on the corresponding layer in the PVW interface, the relevant
parameters of the layer will appear on the right side. Here you can debug the
layer's image parameters, local display, transparency, matting effect, and
priority. When setting the parameters, manually click on the digital area to pop
up the keyboard, and then input numbers. Change the location of the layer, you
can also directly in the PVW area dragging implementation.
When switching a signal, select the layer you want to switch the signal and
double-click the source below. Or long press and drag by signal source, and
then drag to the corresponding layer, you can also achieve layer signal
switching.