28
UAB KOMFOVENT we reserve the right to make changes without prior notice
VERSO PRO2_guide_20-07
EN
5.2.9. Additional zone control (ZN)
1
Setting a desired supply air temperature for an individual ventilation zone. You can also monitor temperature of air sup-
plied to the additional zone as well as the heating/cooling signals.
Enable
Supply temperature
Heating
1ST ADDITIONAL ZONE CONTROL (ZN1)
0.0
0.0
Cooling
Setpoint
21.0
°C
°C
%
0.0 %
5.3. Alarms/Status
This menu item shows information about the air handling unit and its assemblies.
ACTUAL ALARMS
ALARM HISTORY
OPERATION COUNTERS
EFFICIENCY STATUS
VAV STATUS
CONTROLLER STATUS
5.3.1. Actual alarms
This menu item displays relevant messages with identification codes. “A” at the end of the code means that the error is
critical and the unit will be stopped until the fault is rectified. “B” at the end of the code means that the message is informa-
tional and the unit will keep running. Once the cause is resolved, delete relevant errors and messages by pressing “Reset”.
For more information see Chapter 8. “Troubleshooting”.
ACTUAL ALARMS
118A: Communication error
119A: Communication error
117A: Communication error
127B: Service mode
Reset
1
This function only works when optional additional zone modules are connected.
