EN
UAB KOMFOVENT we reserve the right to make changes without prior notice
V_20-09
4
1. SAFETY REQUIREMENTS
•
To avoid accidents and/or unit damage, only a trained technician
must carry out the connection.
•
The appropriate Personal Protective Equipment (PPE) attire is
worn relative to the operation being carried out.
•
Electrical equipment is rated, connected and earthed in accord-
ance with CE regulations.
The air handling unit must be plugged in to an electrical outlet (with earth), which is in good order
and corresponds with all requirements of electric safety. Before starting any operations inside the unit,
make sure that the unit is switched off, and the power cable is unplugged.
•
Earth must be installed according EN61557, BS 7671.
•
The unit should be installed according to Installation and Main-
tenance Manual.
•
Before starting the unit, check correct position of air filters.
•
Service maintenance should be carried out only in conformity
with the instructions specified herein below.
•
If main cable is damaged, only manufacturer, service team or
trained technician must change it in order to avoid accidents.
•
Drilling and using self-tapping screws on the unit casing is pro-
hibited (where it is not provided by the construction), since ca-
bles or tubes inside of the casing may be damaged.
Summary of Contents for VERSO CF 1000 UH
Page 1: ...VERSO Standard Units EN Installation and Maintenance Service Manual ...
Page 2: ......
Page 31: ......
