EN
28
UAB AMALVA we reserve the right to make changes without prior notice.
Light Diode Indication:
1. No LED signal indication on the panel –
unit has been switched off.
2. LED shines steady green and text message is shown –
unit is switched on.
3. Automatic mode symbol is shown on the panel, while green LED shines –
unit is operating in automatic
mode according to weekly schedule.
4. LED blinks red and green and text message is shown – see 3.9 chapter.
5. LED shines steady red and text message is shown –
emergency unit shut down
(see 3.9 chapter).
6. Nothing is showing on the control panel -
unit does not have electric power supply.
Note:
By pressing any button on the panel automatically switching on the display backlight. Backlight is off after
30 seconds when no buttons are pressed.
3.4. Quick Ventilation Level Switchover
Three ventilation levels are projected in the unit. Each of them has its intensity (more detailed settings see in the
next chapter). There is possibility to switch ventilation level quickly from start-up window (3.3 Picture).
To increase ventilation intensity:
touch and hold
and at the same moment increase ventilation intensity
by touching
button.
To decrease ventilation intensity:
touch and hold
and at same moment decrease ventilation intensity
by touching
button.
If ventilation intensity is changed using quick switchover and unit is operating
according to weekly schedule, operation mode automatically is changed to
manual mode.
3.5. Unit Programmable Settings
By soft touching
button the parameters menu is entered. Menu window is selected by buttons
,
(see
further description). When menu window is selected, touch
for selecting desirable parameters and select the
value with
,
. To confirm the changes touch
button.
To return to previous menu or to start-up window touch
button.
Note:
If touch sensitive buttons are inactive for 1 minute, start-up window is shown.
1. Unit operation modes setting
Two unit operation modes are possible: manual and automatic. In manual mode unit operates continuously by
set ventilation intensity. In automatic mode unit works according to weekly schedule (see further weekly schedule
setting).
Note:
If automatic operating mode is selected, there is a symbol
in the start-up window
.
2. Setting ventilation level
Ventilation equipment has three levels of ventilation. Fan intensity for every of the free levels can be attributed
separately for the supplied and exhausted air from 20 to 100%, in 1% steps.
Intensity potentiometers on the automation box inside the air handling unit are
not used, their settings have no effect for the unit control when a control panel
with touch-sensitive buttons is connected.
Summary of Contents for Domekt RECU
Page 51: ......
