32
UAB KOMFOVENT we reserve the right to make changes without prior notice
C6M_GUIDE2-19-04
EN
3.4.8. Settings
Most of the settings are performed in the SETTINGS window. You can access this window by pressing SETTINGS button
at the top of the window.
SETTINGS
ALARMS
USER INTERFACE
LOGIN PASSWORD
CONTROL MODE
CONTROL SEQUENCE
AIR QUALITY
FILTERS
DATE/TIME
CONNECTIVITY
INFORMATION
SAVE CHANGES
RESTORE TO DEFAULT
SETTINGS
TURN OFF
Logout
user
Download
Save
Load
Confirm
Language
Flow units
AHU name
Day - month - year
Time
DHCP
IP address
Subnet mask
Gateway
BACnet ID
Modbus ID
RS-485
C6 ID
Main module firmware
Control panel firmware (1)
Control panel firmware (2)
Log
Settings file
Enter new password
Confirm new password
Flow control mode
Supply flow correction
Extract flow correction
Temperature control mode
Icing protection
Indoor humidity
Stage 1
Stage 2
External coil type
Stage 3
Allow dehumidifying with cooling
Impurity control
Humidity control
Sensor 1
Sensor 2
Outdoor humidity
Minimum intensivity
Maximum intensivity
Check period
Clean filters calibration
Off On
Auto
English
m³/h
Komfovent
01 06 2018
12 15
192 168 0 60
255 255 255 0
192 168 0 1
60
254
19200 baud 8E1
Extract
0 m³/h
0 m³/h
CAV
On
Electric heater
External coil
Cold water
None
20 %
70 %
2 h
CO2
RH
None
ANMP8-Nx4gXr-3OdgVn-GIA
C6 1.3.18.21
C6 1.1.3.14
*.*.*.*
--.- %
After changing any settings, press SAVE CHANGES to apply new values.
To discard changes, return to the start window by pressing the return button.
Button RESTORE SETTINGS restores all settings to the factory defaults. Be careful not to press this button accidentally.
Summary of Contents for Domekt CF 200 V
Page 1: ...DOMEKT User Manual EN ...
