19
UAB KOMFOVENT we reserve the right to make changes without prior notice
DOMEKT_C8_guide_21-07
In the „Modbus RTU“ line, it can be selected what device is connected to the terminals 1-2 of the C8 main board (See
Domekt installation manual). Additional control panel for AHU, building BMS system or external fire damper controller can
be used. If mentioned terminals on the board are not used, do not change this setting and leave it as “Panel”.
Clean filters calibration
– after replacement, you must reset a filter timer by clicking this button.
Reset settings
– allows restoring factory settings.
Clean filters calibration
Atstatyti nustatymus
Advanced settings
2
/ 2
Clean filters
calibration?
Clean filters calibration
Atstatyti nustatymus
Advanced settings
2
/ 2
Reset
settings?
3.1.11. Alarms
Messages appearing during operation are indicated by a red warning symbol in the home screen. Device operation may
be stopped given the severity of a fault message. To read a message, press OVERVIEW section in the menu. You can also
delete current alarms or view a recorded history of faults (up to 50 recent messages).
Detailed information
Energy counters
Alarms
About device
Overview
16:30
OFF
ECO
AUTO
Overview
Scheduling
TURN ON
Settings
Menu
Clogged air flters
W1
Alarms
Delete
History
For more information and tips on alarms see Chapter “Troubleshooting”.
3.1.12. About device
In the „Overview“ screen, menu „About device“ displays information about AHU type, firmware versions and serial num-
ber. By pressing C8 ID line, QR code will be generated, that can be used when connecting via Komfovent Control mobile app.
C8 ID
A1234-B1234-C1234-D12345
Configuration
CF-400-V_v1945
Main module firmware
1.4.26.31
Control panel firmware
1.1.3.21
S/N
2911111
About device
C8 ID
A1234-B1234-C1234-D12345
Configuration
CF-400-V_v1945
Main module firmware
1.4.26.31
Control panel firmware
1.1.3.21
S/N
2911111
About device
