CONTROL PANEL LAYOUT
(left to right):
1.
AC Input
: this IEC
receptacle accepts standard DIN AC power cable. All Komet
amplifiers can be modified to run on either 120V or 240V.
Please inquire with Komet
Amplification for the AC power voltage conversion information
.
2.
Power Switch
: engages the wall AC / power to the amplifier.
3.
Pilot Light
:
illuminates when power switch is placed in the
"On"
position.
4.
Effects Volume
:
determines the volume of the effect
(
s
)
.
5.
Effects Bass
:
reduces the bass content of the wet signal only.
6.
Effects Input
:
(left mono)
mono or stereo input from effect pedal / board.
7.
Effects Input
:
(right)
input from effect pedal / board.
8.
Effects Kill
:
allows owner to use a footswitch to
disengage the effects signal.
9.
Effects Send
:
(line out)
send
to effects unit input.
10.
Effects Send
:
(level)
determines the amount of signal sent to the effect's units.
11.
Speaker Input
:
(16 Ohms)
cabinet input from amplifier’s speaker out.
Copyright 1999-2017, Komet
Amplification. Group, L.L.C. May not be reproduced in any form without express written consent from Komet
Amplification.
