Komatsu WA470-7 Page 33 Assembly Instruction Manual Download

Page: 33 / 43

NO.0080

Adjustment of rear view monitor guide line
position

Assembly procedure

1. Adjustment of rear view monitor guide line position

Adjust the rear view monitor guide line position according to the following procedure.

1-1. Placing marks at rear of machine

①

Stop the machine on a level place and secure a space behind it.

②

Place marks at 1.5 m from the rear end of the machine on the extensions of the outside

lines of the machine.

1.5m

Q'ty

Name

Q'ty

Others

Precautions

Tools to be used

Name

Facilities to be used

1. Adjustment of rear view monitor guide line position

Adjust the rear view monitor guide line position according to the following procedure.

1-1. Placing marks at rear of machine

①

Stop the machine on a level place and secure a space behind it.

②

Place marks at 1.5 m from the rear end of the machine on the extensions of the outside

lines of the machine.

1.5m

*Match the rear view monitor guide lines with these marks.

Reference drawing: The scene after adjusting rear view monitor guide line

Others

1 ×

2 ×

1. Adjustment of rear view monitor guide line position

Adjust the rear view monitor guide line position according to the following procedure.

1-1. Placing marks at rear of machine

①

Stop the machine on a level place and secure a space behind it.

②

Place marks at 1.5 m from the rear end of the machine on the extensions of the outside

lines of the machine.

1.5m

*Match the rear view monitor guide lines with these marks.

Reference drawing: The scene after adjusting rear view monitor guide line

Summary of Contents for WA470-7











































Search results

Summary of Contents for WA470-7

Reviews:

Related manuals for WA470-7

Brands by name

Popular brands

Komatsu WA470-7, Assembly Instruction Manual

Search results

Summary of Contents for WA470-7

Reviews:

Related manuals for WA470-7

Brands by name

Popular brands