background image

3

5.15

INSPECT FAN ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-8

5.16

INSPECT CHARGING SYSTEM WIRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-8

5.17

INSPECT FRONT AXLE AND RE-TORQUE MOUNTING BOLTS . . . . . . . . . . . . . . . . .   5-9

5.18

INSPECT REAR AXLE AND RE-TORQUE MOUNTING BOLTS . . . . . . . . . . . . . . . . . .   5-9

5.19

INSPECT WHEELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-9

5.20

INSPECT RIM SIDE RING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-10

5.21

INSPECT WHEEL BEARINGS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-10

5.22

INSPECT STEERING AXLE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-10

5.23

INSPECT STEERING WHEEL  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-10

5.24

INSPECT LIGHTING/TURN SIGNAL SWITCH - W/O DIMMER SWITCH . . . . . . . . . . .   5-10

5.25

INSPECT LIGHTING/TURN SIGNAL SWITCH - WITH DIMMER SWITCH . . . . . . . . . .   5-11

5.26

INSPECT LIGHTING/TURN SIGNAL SWITCH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-12

5.27

INSPECT F/R SWITCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-13

5.28

INSPECT POWER STEERING SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-14

5.29

INSPECT BRAKE SYSTEM RODS, CABLES AND LINKS . . . . . . . . . . . . . . . . . . . . . . .   5-14

5.30

INSPECT BRAKE PIPING AND CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-14

5.31

INSPECT BRAKE MASTER AND WHEEL CYLINDERS  . . . . . . . . . . . . . . . . . . . . . . . .   5-15

5.32

INSPECT BRAKE SHOES AND ASSOCIATED PARTS . . . . . . . . . . . . . . . . . . . . . . . . .   5-15

5.33

INSPECT BRAKE DRUMS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-16

5.34

INSPECT BRAKE BACKING PLATES  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-16

5.35

INSPECT LOAD FORKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-16

5.36

INSPECT MAST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-17

5.37

INSPECT FORK CARRIAGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-17

5.38

INSPECT LIFT CHAINS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-18

5.39

INSPECT CHAIN WHEELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-18

5.40

INSPECT ATTACHMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-18

5.41

INSPECT HYDRAULIC TANK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-18

5.42

INSPECT CHASSIS AND ATTACHMENT PIPING . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-19

5.43

INSPECT HYDRAULIC PUMP  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-19

5.44

INSPECT LIFT CYLINDER  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-19

5.45

INSPECT TILT CYLINDERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-19

5.46

INSPECT ATTACHMENT CYLINDERS (IF EQUIPPED)  . . . . . . . . . . . . . . . . . . . . . . . .   5-19

5.47

INSPECT LIFT TRUCK CHASSIS AND FRAME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-19

5.48

INSPECT CAB (IF EQUIPPED) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-20

5.49

INSPECT OPERATOR’S SEAT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-20
5.49.1 VEHICLE CONTROLLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-20
5.49.2 TUSK OPERATOR PRESENT SYSTEM (TOPS)  . . . . . . . . . . . . . . . . . . . . . . .   5-20
5.49.3 CONTROLLER TROUBLESHOOTING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-22

5.50

INSPECT EQUIPMENT USED FOR ACCESSING THE LIFT TRUCK . . . . . . . . . . . . . .   5-24

5.51

INSPECT DISPLAY PANEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-24

5.52

INSPECT OVERHEAD GUARD  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-24

5.53

INSPECT LIGHTS, GAUGES AND WARNING DEVICES  . . . . . . . . . . . . . . . . . . . . . . .   5-24

5.54

INSPECT REAR VIEW MIRROR AND REFLECTORS . . . . . . . . . . . . . . . . . . . . . . . . . .   5-25

Summary of Contents for CX20 Series
























































Reviews: