Manual EDU 2AE/TOP/MITO
Page 3
To enter the menu press the ESC key for 2 seconds.
Select the line by pressing
or
then press OK (the symbol
will turn into
). Press the
or
to select the required value
and then confirm through OK (or ESC
if you don’t want to save
the value).
The selected values will be immediately operational, even if you
are still in the menu screen. Repeat the sequence for all the
parameters you wish to change and then push ESC to return to the
main screen.
Press RESET for 3 sec should you need to reset the cycle.
If you want to see all the set parameters press
for 2 seconds,
however you cannot modify the displayed parameters on this
screen.
MAIN MENU:
- - - - - M A I N - M E N U - - - - - -
O K
c h a n g e
E S C
q u i t
P r o g r a m
s e t t i n g
S e q u e n c e
s e t t i n g
Program setting:
It indicates the menu section where you can set or modify the fastening parameters.
To be allowed to enter this menu sequence and EXT options should be OFF.
Sequence:
It indicates the menu section where you can activate the sequence, the switchbox/socket tray
and the bar code.
- - - - - M A I N - M E N U - - - - - -
S e q u e n c e
s e t t i n g
O p t i o n s
Options:
It indicates the menu section where you can set date and time, the password and the language.
PROGRAM MENU:
The first 25 menu lines are available in both the EDU 2AE/TOP/MITO and EDU 2AE/TOP/MITO/TA
models. Lines from 26 to 29 are only available in the TOP/TA model.
- - - - - M E N U - - P R : 1 - - - - -
O K
c h a n g e
E S C
q u i t
1 ) P r o g r a m
n u m b e r :
1
2 ) S c r e w s
n u m b e r :
1
