CAN-AM
COMMANDER 1000 LIMITED
80
Kolpin Outdoors Inc.
205 N. Depot St.
Fox Lake, WI 53933
Tel: (920) 928-3118
www.kolpin.com
E-mail:
It is absolutely necessary to bleed the air out of the UTV’s
engine cooling system. Incomplete bleeding of cooling
system can result in engine damage. If you don’t have
sufficient experience with this process, we strongly
recommend professional service technician assistance.
We are not responsible for damages when cooling system
bleeded incompletely. Please note that additional heater
system will absorbed more than 2 liters of coolant fluid.
MAINTANCE AND CLEANING
To clean polycarbonate surface use soapy water solution or other subtle means.
Dirt and dust wash by gently water stream and swipe only with wet or damp means in the
direction from top to bottom.
The recommended frequency of cleaning of polycarbonate part
is about 1 time per month or according to the actual degree of pollution.
Do not use detergents that could scratch the surface plates.
(abrasives, harsh fabrics, etc.)
Do not use solvents or alkaline detergents or cleaners with ammonia
(ammonium hydroxide).
Do not remove the impurities from the surface of the razor blades or other sharp items.
Do not clean cabine, when the polycarbonate plates are heated by the sun.
Do not use the squeegee, it could be scratched surface plates.
Do not clean the water current strength greater than 50 bar (WAP)
The manufacturer is not responsible for scratching the surface in case of failure to comply with
the above instructions.
All bolted connections of cab must be by user at regular intervals checked and tightened.