5
©
2018 Kolpin Outdoors Inc.
REV 02
One Year Limited Warranty
For the period of one (1) year from the purchase date, Kolpin will replace for the original purchaser, free of charge, any part or parts
found upon examination by Kolpin to be defective in material, workmanship, or both.
All transportation costs incurred submitting product to Kolpin for warranty consideration must be borne by the purchaser. If Kolpin
determines that the product must be returned to the factory for credit, please call 1
-
877
-
956
-
5746 for a Return Merchandise Authori-
zation (RMA) number and shipping instructions.
This warranty does not apply to parts that have been damaged by accident, alteration, abuse, improper maintenance, normal wear,
or other causes beyond the manufacturer’s control. In order to protect you and your ATV, certain parts of the accessory system and/
or hardware are designed to fail when the equipment is over
-
stressed. Parts that are lost due to loosening and improper mainte-
nance are not covered under warranty. This warranty does not cover removal or reinstallation labor fees of the plow system and
related components.
Peripheral products such as engines, electric motors, and actuators may carry an original manufacturer’s warranty. Most hardware
is general in nature and is easily obtained locally. Be sure to replace with minimum metric class 8.8 specification.
6MM FASTENER TORQUE:
7 ft. lbs. (9 Nm)
Ill. 1
–
5
7.
Reinstall the OEM fasteners to the backrest and headrests. If rivots were drilled out of the head rests, install (1) M6 x
26mm Button Head (Item 6), (1) M6 Lock Washer (Item 3), and (1) M6 Flange Lock Nut (Item 4). Repeat for all four
headrest mounting locations. (See Illustration 1
-
5 and 1
-
6)
8.
If the seat belt bracket bolt was removed, reinstall and torque to 40 ft
-
lbs.
9.
Tighten all remaining hardware to specifications.
Ill. 1
–
6
