2
©
2018 Kolpin Outdoors Inc.
REV 02
BEFORE YOU BEGIN
Thank You and congratulations on your purchase! Kolpin windshields are the most durable windshields in the industry.
With proper installation, care, and maintenance, your Kolpin windshield will last for years to come! Before You Begin:
•
Inspect the contents of the package to ensure all parts and tools are accounted for. If any hardware is missing, do
not return to the store. Call Kolpin directly for assistance. Toll Free 1
-
877
-
956
-
5746.
•
Please read and understand all assembly instructions, notices and warnings before assembling and operating your
Kolpin windshield.
•
For proper installation, two people are highly recommended.
•
Keep these instructions for future reference. Dealers: Provide owner manual to customer at time of purchase.
•
To facilitate installation, make sure your vehicle is clean and free of debris.
•
All directions referring to right and left are when the rider is sitting on the machine.
APPROXIMATE ASSEMBLY TIME: 30 minutes
TOOLS REQUIRED FOR INSTALLATION:
•
4 mm hex socket or hex key
•
10mm Combination Wrench
•
25 Torx
SAFETY INFORMATION
Our windshields were designed with your safety in mind. Please read and understand all Cautions, Notices and
Warnings in this manual before you begin.
If any hardware is missing, do not return to the store. Call Kolpin directly for assistance.
Toll Free 1
-
877
-
956
-
5746
TO AVOID SERIOUS INJURY OR DEATH:
1.
OPEN POSITIONS ON FULL TILTING WINDSHIELDS ARE DESIGNED FOR LOW
-
SPEED RIDING ONLY.
2.
IF VEHICLE IS TRAILERED FACING FORWARD, FULL TILTING WINDSHIELDS MUST BE IN THE CLOSED
POSITION WITH TILTING T KNOBS TIGHTENED. FAILURE TO CLOSE AND SECURE THE WINDSHIELD
MAY ALLOW AIRFLOW TO SEPARATE WINDSHIELD FROM VEHICLE, RESULTING IN AN ACCIDENT AND
SEVERE INJURY OR DEATH. DO NOT TRAILER VEHICLE FACING REARWARD WITH WINDSHIELD IN-
STALLED. AIRFLOW MAY CAUSE WINDSHIELD TO SEPARATE FROM VEHICLE, RESULTING IN AN AC-
CIDENT AND SEVERE INJURY OR DEATH. REMOVE WINDSHIELD OR TRANSPORT VEHICLE IN EN-
CLOSED TRAILER.
3.
UTVs ARE TO ONLY BE DRIVEN WITH CLEAN WINDSHIELDS FOR DRIVING VISIBILITY. IF DIRT OR DE-
BRIS ACCUMULATES ON THE WINDSHIELD WHEN RIDING, STOP THE UTV AT THE NEXT SAFE LOCA-
TION ON THE TRAIL TO CLEAR OFF THE WINDSHIELD BEFORE RESUMING RIDING.
4.
ONLY INSTALL WINDSHIELDS THAT ARE DESIGNED FOR THE MAKE AND MODEL OF THE UTV. IN-
STALLATION OF A WINDSHIELD THAT WAS NOT DESIGNED FOR THE UTV MAKE AND MODEL CAN
IMPACT WINDSHIELD DURABILITY AND PERFORMANCE.
5.
READ AND UNDERSTAND WINDSHIELD INSTRUCTION SHEETS AND UTV OWNER MANUAL BEFORE
WINDSHIELD INSTALLATION OR OPERATING THE VEHICLE.
6.
PERIODICALLY CHECK FOR WEAR AND TIGHTNESS OF ALL FASTENERS. REPLACE OR RE
-
TORQUE
FASTENERS AS NECESSARY.
DANGER
!
!
