6
© 2020 Kolpin Outdoors Inc.
REV 00
RANCHER / FOREMAN / RUBICON PREPARATION
(continued):
5.
Remove the rear fender cover to access the battery.
Disconnect black (negative) and red (positive) cables
from battery as shown. Retain bolts for use during
reinstallation. (See illustration 1
-
5).
RANCHER / FOREMAN / RUBICON WINCH
INSTALLATION:
6.
Position the roller mount bracket (item #2) into the front
bumper as shown. Fasten the sub
-
assembly into front
bumper using the M8 bolts (item #3) and M8 locknuts
(item #4). Using the hardware provided with winch kit,
install the roller fairlead (included with winch kit) onto
the roller mount bracket. (See illustrations 1
-
6, 1
-
7 and
1
-
8).
Note, contactor (included with winch kit) is
shown mounted in optional location on roller
bracket.
7.
Tighten to specification.
Ill. 1
-
5
Rear fender cover
WARNING
ALWAYS
disconnect black negative (
-
) cable
from battery
FIRST
. Failure to do so will result
in high current electrical arc, and may result in
battery explosion if tool touches grounded
frame. Death or serious injury may occur.
!
!
Ill. 1
-
6
Ill. 1
-
8
8MM FASTENER TORQUE:
17 ft. lbs. (23 Nm)
Ill. 1
-
7
Roller
bracket
3
4
3
