
Note:
-"OPEN" position,the ventilation door
opens to allow air,smoke or odors to
be expelled from the room.
-"CLOSE" position,the ventilation door
is closed and the air will be circulated
inside the room and conditioned.
VENTILATION LEVER
Ventilation Lever
When the slider at the:
When the slider at the:
1
Remote control panel
1
POWER BUTTON
Operation starts when pressing this button, and stops
when pressing this button again.
2
FAN SPEED BUTTON
Select the fan speed HIGH, MID, LOW and AUTO in sequence.
3
Press the keypad also to increase the selected time
.
Press the keypad to decrease the selected time
.
The time seting range is from 0~24 hours.
4
TEMP/TIMER BUTTON
Press the
keypad to increase the set (operating)
temperature of the unit.and Press the keypad to
decrease the set (operating) temperature of the unit.
The temperature seting range is from 16~30
℃.
MODE BUTTON
Select the operation mode, AUTO, HEAT, COOL,
FAN
,
DRY
(for reverse cycle model) or AUTO,COOL,
FAN
,
DRY
(for cooling only model).
5
SIGNAL RECEIVER
6
SWING BUTTON
Activate the automatic air swing function.
7
FILTER BUTTON
This feature is a reminder to clean the Air Filter (See
Care and Cleaning) for more efficient operation and
cooling. The LED (light) will illuminate after 250 hours
"Check Filter" button and the light will go off.
of operation. To reset after cleaning the filter, press the
This function is applicable to KAG-80HRE4, KAG-100HRE4,
KAG-150HRE4, KAG-200HRE4, KAG-250HRE4 only.
If wireless remote controller is lost, open the surface panel and operate manually.
CLOSE
VENT
OPEN
CLOSE
VENT OPEN
Summary of Contents for e KAG-100HME4
Page 22: ...KPII 20190522...