27
3.5 Measure Mode
Under measurement interface, press [MODE] key to set the measure mode.
mm
Measure mode:
Fine: Fine measurement. (n=1)
Fine Repeat: Repeat the fine measurement in n times, n
≤
99, until pressing [stop].
The fine repeat mode will increase the quality of data, especially under the unstable
environment.
Average: Average value for measurement in several times, for example n= 3 (2...99)
Limit Avg.: The equipment will check whether average measured value (sDevM) is
less than standard value. If the average value less or equals to standard deviation
value, the equipment will stop measurement. Otherwise, the measurement will still
