In order to enter the sensitivity settings menu, press and hold the “SET” button for 3
seconds, or until “-C00” code displays in the bottom right corner of the screen. Press the
“BAT” button to cycle through the different codes (refer to the Sensitivity Codes Table).
When on the desired code you can use the “MG+” butto or the “UV-” button to adjust the
settings accordingly. Once adjusted, place a finger on the hopper sensor to save and exit
the sensitivity settings menu. Codes are listed below for reference.
SENSITIVITY CODES TABLE
19
18
CODE
C00
H-C01
-C04
H-C07
-C08
H-C09
H-C10
-C24
-C25
-C26
-C28
-C35
DETAIL
Voice Switch
Voice Volume
External Display
Stop Line
Alarm Last Time
Hopper Sensor Sensitivity
Stacker Sensor Sensitivity
Double Note Sensitivity
UV Sensor Sensitivity
MG Sensor Sensitivity
Counting Threshold
Button Beep
SETTING
0
1
1
40
0
150
125
20
120
5
220
1
ADJUSTMENT
0 = off / 1 = on
0 = off / larger number = louder sound
0 = off / 1 = on
larger number = quicker stop
0 = shut / 1 = open
larger number = higher sensitivity
larger number = higher sensitivity
larger number = higher sensitivity
0 = close / larger number = higher sensitivity
0 = close / larger number = higher sensitivity
0 = off / 1 = on
5.3
Sensitivity Settings
