3.5
Add + Batch Feature
This feature batches the desired quantity of bills and monitors the runnig total at the
same time. To activate this function, press the “ADD” and “BAT” button until both the
“BAT” and the “ADD” indicators are displayed on the screen. By default, the batch size
is preset to 100. Use the “MG/+” and “UV/-” buttons to manually select your desired
batch size. To exit the ADD+BATCH feature, press the “ADD” and “BAT” buttons until the
indicators on the screen disappear.
DETECTION FEATURES
4.
4.1
UV Counterfeit Detection
The Kolibri Automatic Bill Counter can identify bills suspected of being counterfeit using
an ultraviolet light detection system. This function is available in all modes by pressing
the “UV” button until the “UV” indicator is displayed on the screen.
When a suspect bill is detected, the unit will stop, beep and display the error code “E01”
on the screen. The unit will not stop beeping or start until the suspect bill is removed from
the stacker, and the “START” button is pressed. The suspect bill will not be added to the
count.
Please note that a suspect UV bill does not necessarily mean that the bill is counterfeit.
There are several reasons a genuine bill may be recognized as counterfeit. Possible
reasons for a bill to be indicated as suspect include: detergent washed bills, direct
sunlight exposure, worn out bills, excessively dirty bills or advanced counterfeiting
techniques used to produce the bill. Separate equipment may be required to determine
definitively whether a note is counterfeit.
10
