![Koldwave K6HK144BBA2ACA0 Owner'S Manual Download Page 3](http://html1.mh-extra.com/html/koldwave/k6hk144bba2aca0/k6hk144bba2aca0_owners-manual_1990598003.webp)
3
Owner’s Manual
K6HK144BBA2ACA0 / K6HK144BEA2ACA0
General Safety Information
Please read this manual carefully for correct installation and usage. Please read all safeguards.
1. Transport and store the unit in an upright position only. Leave unit in an upright position for
at least 3 hours before first use.
2. Always place the unit on an even, level surface.
3. Ensure the unit is connected to a grounded power supply of the correct rating / capacity.
4. The unit will operate between 18°C (64°F) ~ 45°C(113°F) depending on the temperature
setting.
5. DO NOT use this unit for other purposes that is not described in this instruction manual.
6. DO NOT tilt the unit.
7. NEVER unplug the unit under operation.
DO NOT use the unit in wet environments, such as a laundry room, to avoid
the risk of electrical shock.
10. DO NOT place any foreign objects on the unit.
11. DO NOT operate the unit with wet or damp hands.
12. DO NOT allow chemical substances to come into contact with the unit.
13. DO NOT operate the unit near flammable substances or vapors such as alcohols,
pesticides, gasoline, etc.
14. DO NOT unplug to turn off the unit. Always use the power switch to start and to stop the unit.
15. Always turn off the unit and unplug it before cleaning, moving or performing maintenance.
16. AVOID using adapter plugs or extension cords. If extension cord or an adapter plug is
needed , ensure they are correctly rated for the application. Consult a local qualified
electrician for proper setup. Any extension cord used with this device must be rated for
a minimum of 72A.(460V)
17. DO NOT unplug the unit by pulling on the electrical cord. Keep electrical cord away from
heat sources and always completely unroll the cord to avoid overheating. If the power cord
is damaged, contact a qualified service agent, qualified electrician, or similarly qualified
person for replacement.
DO NOT operate the unit in explosive or flammable environments.