manualshive.com logo in svg

Koldwave 5KK14BEA2AA00, Service Manual, Page: 4 / 64

Share
Download
Koldwave 5KK14BEA2AA00 Service Manual Download Page 4

4 

page

Service Manual

5KK14BEA2AA00 / 5KK21BGA2AA00 / 5KK30BGA2AA00

GENERAL DESCRIPTION

General air condi oning system

1) conven onal air condi oners cool the en re enclosed environment.
2)  They act as “heat exchangers”, equiring an interior unit (evaporator) to blow cool 

air into the interior and an exterior unit (condenser) to exhaust exchanged heat 
to the outdoors.

Portable air condi oning system

1)  The  5KK14BEA2AA00/5KK21BGA2AA00/5KK

30BGA2AA00 is a spot cooler which directs 
cool air to par cular areas or objects.

2)  The  5KK14BEA2AA00/5KK21BGA2AA00/5KK

30BGA2AA00 has the following features.

3)  The  innova ve design of the  KK14BEA2AA

00/5KK21BGA2AA00/5KK30BGA2AA00 has 
resulted in one compact unit, replacing the 
need for two separate units.

4)  With the whole cooling system built into one 

compact unit, the 5KK14BEA2AA00/5KK21BG
A2AA00/5KK30BGA2AA00 requires no piping 
and can be easily transported and installed.

5)  The  5KK14BEA2AA00/5KK21BGA2AA00/5KK

30BGA2AA00 is economical because it cools 
only the area or objects which need to be 
cooled.

Condenser

Outdoor Unit

Evaporator

Indoor Unit

Intake air
(to Evaporator)

Intake air
(to Condenser)

Filter

Filter

Exhaust Hot Air

Cooling Air

Summary of Contents for 5KK14BEA2AA00

































































Reviews:

No comments