6
Loosen the round nut on the wheel enough
for the wheel to slide onto the frame. If the
round nut comes all the way off, be sure to
reassemble it with the spring as shown.
Position wheel lever, 90° angle from wheel as
shown, and slide wheel axle onto frame.
Tighten round nut clockwise, as tight as
possible.
Push lever toward frame as shown. Lever must
be very tight. If it isn’t tight, open lever to 90°
angle from wheel and retighten the round
nut. Push lever toward frame until it is tight.
T
TE
ES
ST
T:: Shake wheel back and forth to be sure
it is tight on the frame.
T
TO
O R
RE
EM
MO
OV
VE
E W
WH
HE
EE
ELL:: Open lever to the 90°
angle position. Rotate round nut on opposite
side counter clockwise until the wheel can
slide off of the frame.
3
4
5
3
4
5
R
Ro
ou
un
nd
d N
Nu
utt
S
Sp
prriin
ng
g
LLe
evve
err
To Adjust Handle
1
1
Press buttons on handle frame in with your
thumbs and rotate handle up or down until
you find your desired height.
S56J-A.qxd 03/06/2006 9:52 AM Page 6
