background image

22

Disassembly of the mincer housing and mixing 
blade

The mincer housing (20) is easily removable for quick and 
thorough cleaning. After loosening the attachment bolts 
(25), remove the mincer housing (20) towards the front 
while pivoting it to the right, as shown in the picture.

After loosening both front tommy nuts (60) by hand, remove 
the mixing blade bracket (61) towards the front while rotating 
it slightly to the right and while simultaneously holding the 
mixing blade (62) firmly with the other hand. Pull the mixing 
blade (62) out of the rear attachment and remove it by tilting 
it slightly upwards.

20 = Mincer housing
25 = Mincer housing attachment bolts
60 = Tommy nuts for mixing blade bracket
61 = Mixing blade bracket

60

61

25

20

Mixer equipment

The separately switchable mixer equipment serves the raw 
product blending of different meat types, as well as the 
mixing of herbs and spices prior to mincing. 
The mixing blade (62), the mincer feed screw (21) and the 
mincer housing (20) are designed in such a manner that the 
meat is fed quickly and gently to the cutting set, where it 
minced to the desired granulation.

Attention: 
The meat mincer can be switched ON only when the 
protective cover (5) is closed.

21 = Mincer feed screw
62 = Mixing blade

62

21

Mixer mincer machine accessories

The following accessories are included in the scope of 
delivery depending on machine model:

33 = Insert ring, narrow (only for the Unger cutting system)
34 = Insert ring, wide (only for the Unger cutting system)
58 = Combination hook wrench for MW32-120
59 = Combination hook wrench for MW114-120
63 = Splatter guard MW32-120
64 = Splatter guard MW114-120 (Optional)
65 = Splatter guard MW52-120
66 = Splatter guard MW130-120 (Optional)
80 = Combination hook wrench for MW52-120
81 = Combination hook wrench for MW130-120

63

34

33

58

59

80

81

64

65

66

Summary of Contents for MW114-120

































Reviews: