Light does not
work, motor does
not work
Light damaged
Replace lights
Power cord looses
Connect the wires as
per the electric diagram
Oil leakage
One way valve and the air
ventilation entrance are not
tightly sealed
Take down the one
way valve and seal
with glue
Leakage from the
connection of U-shaped
section and cover
Take U-shaped section
down and seal with
soap or paint
Shake of the body
The leaf damaged and
causes shaking
Replace the leaf
The motor is not tightly
hanged
Lock the motor tightly
The body is not tightly
hanged
Fixed the body tightly
Insufficient suction The distance between the
body and the gas top too
long
Readjust the distance
Too much ventilation from
open doors or windows
Choose a new place
and resemble the
machine
The machine
inclines
The fixing screw not tight
enough
Tighten the hanging
screw and make it
horizontal
The hanging screw not
tight enough
Tighten the hanging
screw and make it
horizontal
※
IF ANY PROBLEM CANNOT BE RECTIFIED PLEASE
CONTACT THE ANGENT IN YOUR STATE OR THE
DISTRIBUTOR SERVICE DEPARTMENT.
