Kokido K2O K880BX/EU, Owner'S Manual & Installation Manual

Page: 19 / 60

18
How to read the temperature of the evaporator sensor?
When displaying current temperature, press “ ” key, Controller will display defrosting
temperature. Release “ ” key, then return to current temperature.
How to look over and adjust the real clock time?
Press the key “Set” to enter the state of displaying time when in the state of displaying temperature.
Press the key “Set” for 2 seconds to enter the state of adjusting time, and press the key “Set” to return
to the state of displaying temperature.
In the state of adjusting time, the hour part of the LED flashes, and you can adjust the hour by
pressing the key “ ” and “ ”, then press the key “Set”, and the minute part of the LED flashes,
you can also pressing the key “ ” and “ ” to adjust the value, then press the key “Set”
again to exit. Pressing the key “M” in the adjusting process means giving up and exiting, but the time
will not be saved.
Advanced Operation
Press the key “M” and hold it for 5 seconds, and if you have set the password, the LED display the
“PAS” to hint you to enter the password, you can use the key “ ” and “ ” to enter the
password, if the password is correct, the LED will display the parameter code (refer to table), use
“ ” or “ ” to select the parameter code
，
Pressing the “set” key can make it to show the
value of the parameter after select the parameter, here you use “ ” or “ ” to set the
parameter(pressing the key and not release can add or minus rapidly), then press the “set” key to
return to the state of showing parameter code after finishing setting. Pressing the key “M” can exit the
parameter setting state when display the parameter code, pressing the key “M” means cancel when
in the process of setting parameter, and the parameter will not be changed.