English
31
4. Do not use the appliance with its suction opening or exhaust opening obstructed.
The temperature of the motor may rise abnormally, causing troubles such as
deformation of parts or motor burnout.
5. Do not operate the appliance when the suction opening is blocked.
The motor may overheat, causing deformation of parts or malfunction of the motor.
6. When you drop or bump the appliance accidentally, check for breakage, crack, or
deformation in the appliance. Breakage, crack or deformation may cause injuries.
7. When the appliance is out of condition or emits abnormal sound during use,
immediately turn o
ff
the switch and request repair from your local retailer or
authorized servicing agent. If you continue to use the appliance as it is, it may lead
to injuries.
ADDITIONAL SAFETY WARNINGS
1. Always charge the battery at a temperature of 0–40°C.
A temperature of less than 0°C will result in over charging which is dangerous. The
battery cannot be charged at a temperature greater than 40°C.
The most suitable temperature for charging is that of 20–25°C.
2. Do not use the charger continuously.
When one charging is completed, leave the charger for about 15 minutes before
the next charging of battery.
3. Do not allow foreign matter to enter the hole for connecting the rechargeable battery.
4. Never disassemble the rechargeable battery and charger.
5. Never short-circuit the rechargeable battery. Shortcircuiting the battery will cause
a great electric current and overheat. It results in burn or damage to the battery.
6. Do not dispose of the battery in
fi
re. If the battery is burnt, it may explode.
7. Bring the battery to the shop from which it was purchased as soon as the post-
charging battery life becomes too short for practical use. Do not dispose of the
exhausted battery.
8. Do not insert object into the air ventilation slots of the charger. Inserting metal
objects or in
fl
ammables into the charger air ventilation slots will result in electrical
shock hazard or damaged charger.
9. When using this unit continuously, the unit may overheat, leading to damage in the
motor and switch. Therefore, whenever the housing becomes hot, give the tool a
break for a while.
10. Make sure that the battery is installed
fi
rmly. If it is at all loose it could come o
ff
and cause an accident.
11. Do not use the product if the tool or the battery terminals (battery mount) are
deformed.
Installing the battery could cause a short circuit that could result in smoke
emission or ignition.
12. Keep the tool’s terminals (battery mount) free of swarf and dust.
○
Prior to use, make sure that swarf and dust have not collected in the area of the
terminals.
○
During use, try to avoid swarf or dust on the tool from falling on the battery.
000Book̲R36DB̲ChT.indb 31
000Book̲R36DB̲ChT.indb 31
2022/04/21 8:25:44
2022/04/21 8:25:44
