2
11. When indwelling the catheter, please inflate the balloon after inserting the catheter apart from
the balloon end portion by a distance equal to or greater than 23 cm. Indwelling of the catheter
in an intermediate of the valve causes the valve and the catheter to be broken.
12. If the insertion of the catheter is repeated a plurality of times, water may accumulate in the
urethral canal. If the simulator is used in such a state, water may leak through the urethral exit.
Please slant the simulator suitably to drain the water.
13. After use, please wash the simulator and the catheter well with water. If the lubricant dries and
hardens, it may interfere with the use of the simulator.
14. Please check the state of the valve at every use. If the valve is broken, it may cause a leakage of
water.
15. Oil components may come out of the genital skin. After use, please do not keep the genital skin
attached to the simulator. Please wrap it in cooking paper, gauze, etc., put it into an attached
reclosable poly bag, and keep it. For a detailed storage method, please refer to the washing
and storage methods on page 15.
16. Apply commercially available baby powder to reduce friction if you mind stickiness of the
genital skin or after it is washed with water following use.
17. Please check the state of the genital skin every three years as a reference, and exchange it
accordingly.
18. Please do not place objects on the simulator. Otherwise, the simulator may be deformed.
19. Please do not keep the simulator in contact with printed matter. Print, such as letters, may
transfer to the simulator and be fixed there.
20. When storing the simulator, please select a place that is not subject to direct sunlight and
ultraviolet rays.
21. This product is intended for use in standard operating environments. Do not use it in heavy
industrial settings.
22. This model uses urethane foam for some of its parts, and may be susceptible to damage from
pests that are attracted to urethane foam (such as insects in the ant family).
When storing this model, ensure that thorough measures are taken to prevent pest damage
before storing. The company will not be involved with or held liable for pest damage that
occurs during storage.
1. The contents of this instruction manual are subject to change without notice.
2. This instruction manual may not be reproduced in part or in its entirety without permission.
3. Please contact the manufacturer in the event that any errors or omissions are found in the contents of
this instruction manual.
4. This product should be used only as described in this instruction manual. In particular, the product
should not be used in any way that contravenes the precautions noted in the instruction manual.
Summary of Contents for LM-109M
Page 2: ...10000...
