AVV-711 Quick Book
37
7.2 TO CHANGE PROGRAM PARAMETERS
To change program parameters press
Cautions in this screen
Shortcuts in this screen
Use biaxial live only where weak shafts
coupling present
To select/reset use manual input
Tasks in this screen
To select/reset use 2 decimals resolution
(when reset it is 3 decimals)
·
Select to use manual input or transducers
data
·
Allow use of manual angle only
·
Select default display resolution
to 2 or 3 decimals
·
Select default measure unit metric mm or
uk inches(mils)
·
Select to enable biaxial live aligning(use
both Y and X coordinates) or use single Y
coordinates only(default)
To choose between measure unit metric mm
or uk inches(mils)
To select/reset biaxial live aligning mode
To save and exit
Embedded inclinometers
not allowed for vertical machine
