TP-5660 11/98
This manual provides operation and installation
instructions for Kohler Model ZCS automatic transfer
switches that use a 40- to 3000-ampere contactor as the
power switching device.
All information in this publication represents data
available at time of print. Kohler Co. reserves the right to
change this literature and the products represented
without incurring obligation.
Read through this manual and carefully follow all
procedures and safety precautions to ensure proper
equipment operation and to avoid bodily injury. Read
and follow the Safety Precautions and Instructions
section at the beginning of this manual. Keep this
manual with equipment for future reference.
Equipment service requirements are minimal but are
very important to safe and efficient operation; therefore,
inspect parts often and perform required service at the
prescribed intervals. An authorized service distributor
or dealer (authorized service center) should perform
required service to keep equipment in top condition.
List of Related Materials
This manual covers operation and installation
information for the transfer switch’s power switching
device. Decode the transfer switch part number model
code from the transfer switch nameplate and verify that
the transfer switch’s power switching device matches
that what is shown on the front cover of this manual
before proceeding with operation or installation.
A separate operation and installation manual that
covers information specific to the transfer switch’s
electrical controls (logic controller) completes operation
and installation instructions for the transfer switch.
Three types of electrical controls are available on the
Model ZCS transfer switch, and each type is covered in
a separate manual.
The following table lists the
available electrical controls and the related operation
and installation manual part numbers.
Electrical Controls
Operation/
Manual
E33+ (Solid State)
TP-5662
S340+ (Solid State)
TP-5663
M340+ (Microprocessor)
TP-5664
Separate manuals cover service and parts information
for transfer switch power switching devices and
electrical controls. The following table lists the available
manuals and the related manual part numbers.
Power Switching Device
Service/Parts
Manual
ZCS/ZCB (Contactor)
TP-5668
Electrical Controls
Service/Parts
Manual
E33+ (Solid State)
TP-5670
S340+ (Solid State)
TP-5671
M340+ (Microprocessor)
TP-5672
Transfer switches with microprocessor electrical
controls and communication accessories can be
monitored and controlled with a personal computer and
software. The following table lists the available manuals
and part numbers.
Communications Item
Operation/
Manual
Remote Monitoring and Control
Communications (Monitor) Software
TP-5823
Communications Kits
TT-847
Summary of Contents for ZCS series
